2 ton tensile testing system

1 Introduction

l  Suitable for tension, compress, shear, peeling, tear, test

l  Attractive appearance, easy operating, stable and reliable

l  Dual test space, upper space for tension test, bottom space for compress test

l  Crossbeam speed can reach up to 500mm/min, suitable for most test speed

l  Low noise during test

l  Suitable for industries of metal manufacturing, non-metal manufacturing, industrial and mining enterprises, technical supervision, commodity inspection and arbitration and other departments

2. Test method

GB/T 2611 testing machine General technical requirements

GB/T 16491 electronic universal testing machine

GB/T 16825.1 Inspection of static single-axis testing machines - parts 1: tension/compression testing machines-verification and calibration of the force-measuring system

ISO 7500-1 metallic materials-verification of static uniaxial testing machines- parts 1: tension/compression testing machines-verification and calibration of the force-measuring system

GB/T 228 metal materials tensile test method at room temperature

GB/T 232 metal material bending test method

GB/T 7314 metal materials room temperature compression test method

3. Technical parameters

How to Select the Right Tensile, Compression, Bending, Shear, Peel, and Tear Testing Machine: Calculation Formulas with Examples

Selecting the appropriate testing machine for tensile, compression, bending, shear, peel, and tear tests requires careful consideration of multiple factors, including the force range, specimen dimensions, test standards, and machine capabilities. Below are the key calculation formulas to help determine the necessary machine specifications, along with examples for better understanding.

1. Tensile Testing Machine Selection

Tensile testing machines measure the maximum tensile strength and elongation of materials.

Key Formula:

F_max=σ_max × A

Where:

F_max = Maximum required force (N)

σ_max = Ultimate tensile strength of the material (MPa)

A = Cross-sectional area of the specimen (mm²)

Example: For a steel specimen with σ_max =400MPa and cross-sectional area A =100mm²:

F_max=400 × 100=40,000N (40kN)

A 50 kN tensile testing machine would be suitable.

2. Compression Testing Machine Selection

Compression tests determine a material's resistance to compressive forces.

Key Formula:

F_max=σ_c × A

Where:

F_max = Maximum required force (N)

σ_c = Compressive strength of the material (MPa)

A = Cross-sectional area of the specimen (mm²)

Example: For a concrete cube with σ_c =30MPa and A =150²=22,500mm²:

F_max=30 × 22,500=675,000N (675kN)

A 1000 kN compression testing machine would be ideal.

3. Bending Testing Machine Selection

Bending tests evaluate the flexural strength of materials.

Key Formula for Three-Point Bending:

Where:

σ_f = Flexural stress (MPa)

F= Applied force (N)

L= Span length (mm)

b= Width of the specimen (mm)

h= Thickness of the specimen (mm)

Example: For a wooden beam with L=500mm, b=50mm, h=25mm, and requiring a stress of 10 MPa:

A 5 kN bending tester would be suitable.

4. Shear Testing Machine Selection

Shear tests determine the shear strength of materials.

Key Formula:

F_max=τ × A

Where:

F_max = Maximum shear force (N)

τ= Shear strength of the material (MPa)

A = Shear area (mm²)

Example: For an aluminum sheet with τ=90 MPa and A=200mm²:

F_max=90×200=18,000N(18kN)

A 20 kN shear testing machine is recommended.

5. Peel Testing Machine Selection

Peel tests measure the adhesion strength between bonded materials.

Key Formula:

Where:

P= Peel strength (N/mm)

F= Measured force (N)

W= Width of the specimen (mm)

Example: For a tape with F=50N and W=25mm:

A peel testing machine with at least 5 N force capacity is required.

6. Tear Testing Machine Selection

Tear tests determine the resistance of a material to tearing forces.

Key Formula:

Where:

F_tear= Tear strength (N/mm)

F= Measured force (N)

t= Thickness of the specimen (mm)

Example: For a rubber sheet with F=100N and t=2mm:

A tear testing machine with 100 N capacity is needed.

When selecting a testing machine, ensure that the maximum force capacity of the machine is at least 1.2 to 1.5 times the calculated force to account for safety margins and unexpected variations. Additionally, consider compliance with relevant test standards (ASTM, ISO, GB, EN, JIS) and machine features such as speed control, data acquisition, and test automation.

By using the above formulas and examples, engineers and manufacturers can accurately determine the appropriate testing machine specifications for their specific material and application requirements.

2-ton tensile testing machine,2-ton universal testing machine,high-capacity tensile testing systems,2-ton material testing equipment,digital 2-ton tensile testing system,2-ton tensile strength testing machine,universal testing machines for metal,tensile test machine for rubber and plastic,2-ton load testing system,2-ton testing machine for materials,2-ton mechanical testing systems,high capacity universal test equipment,material testing systems 2 tons,2-ton stress testing machine,customizable tensile testing system 2 ton,best tensile testing machines for industrial use,precision 2-ton testing machine,2-ton tensile testing for plastics and metals,reliable 2-ton testing system for composites,2-ton test machine calibration,best 2-ton tensile testing machine for industrial applications,high-precision 2-ton tensile strength testing system,digital 2-ton universal testing machine for rubber and plastics,2-ton tensile testing system for metal and composite materials,affordable 2-ton material testing equipment for quality control,automatic 2-ton tensile strength tester for plastic samples,2-ton tensile testing machine for testing mechanical properties of metals,reliable 2-ton universal testing machine for tensile testing of polymers,2-ton digital tensile testing system with automatic load measurement,2-ton tensile testing machine for tensile and elongation testing,customizable 2-ton testing machine for composite material testing,high-capacity 2-ton tensile testing system for materials research,2-ton universal testing machine with real-time data collection,top-rated 2-ton tensile test system for material testing labs,2-ton testing machine for tensile strength and elongation testing of rubber,2-ton universal tensile testing machine for engineering material testing,heavy-duty 2-ton testing system for quality control in manufacturing,automatic 2-ton tensile test equipment for high-accuracy testing,2-ton digital universal testing machine for tensile and compression testing,best 2-ton tensile strength testing system for laboratory use