PE pipe tensile strength tensile testing machine

1. introductions

The PE pipe tensile strength tensile testing machine is equipped with a special tensile fixture, which can detect the tensile strength of the PE pipe sample processed into dumbbell shape. The PE pipe tensile strength tensile testing machine is controlled by computer software, which can display the test force, Test time, test curve, displacement or deformation, etc. After the test, the test results can be automatically saved, and the test report can be printed by connecting to a printer.

2. relative test method for PE pipe tensile strength test

GB/T 19810 polyethelne (PE) pipe and fittings – determination of the tensile strength and failure mode of test pieces from a butt-fused joint

ISO 13953 polyethelne (PE) pipe and fittings – determination of the tensile strength and failure mode of test pieces from a butt-fused joint

3. Relevant test methods for design, manufacture and inspection of tensile testing machine PE pipe tensile strength tensile testing machine

GB/T2611 general requirements for testing machines

GB/T16491 electronic universal testing machine

GB/T16825.1 verification of static uniaxial testing machines --- part 1: tension / compression testing machines --- verification and calibration of the force measuring system

ISO7500-1 metallic materials--- verification of static uniaxial testing machine --- part 1: tension / compression testing machines --- verification and calibration of the force measuring system

ASTM E4 standard practice for force verification of testing machines

EN 10002-2 tensile testing of metallic materials --- part 2: verification of the force measuring system of the tensile testing machine

4. technical specifictions

How to Select the Right Tensile, Compression, Bending, Shear, Peel, and Tear Testing Machine: Calculation Formulas with Examples

Selecting the appropriate testing machine for tensile, compression, bending, shear, peel, and tear tests requires careful consideration of multiple factors, including the force range, specimen dimensions, test standards, and machine capabilities. Below are the key calculation formulas to help determine the necessary machine specifications, along with examples for better understanding.

1. Tensile Testing Machine Selection

Tensile testing machines measure the maximum tensile strength and elongation of materials.

Key Formula:

F_max=σ_max × A

Where:

F_max = Maximum required force (N)

σ_max = Ultimate tensile strength of the material (MPa)

A = Cross-sectional area of the specimen (mm²)

Example: For a steel specimen with σ_max =400MPa and cross-sectional area A =100mm²:

F_max=400 × 100=40,000N (40kN)

A 50 kN tensile testing machine would be suitable.

2. Compression Testing Machine Selection

Compression tests determine a material's resistance to compressive forces.

Key Formula:

F_max=σ_c × A

Where:

F_max = Maximum required force (N)

σ_c = Compressive strength of the material (MPa)

A = Cross-sectional area of the specimen (mm²)

Example: For a concrete cube with σ_c =30MPa and A =150²=22,500mm²:

F_max=30 × 22,500=675,000N (675kN)

A 1000 kN compression testing machine would be ideal.

3. Bending Testing Machine Selection

Bending tests evaluate the flexural strength of materials.

Key Formula for Three-Point Bending:

Where:

σ_f = Flexural stress (MPa)

F= Applied force (N)

L= Span length (mm)

b= Width of the specimen (mm)

h= Thickness of the specimen (mm)

Example: For a wooden beam with L=500mm, b=50mm, h=25mm, and requiring a stress of 10 MPa:

A 5 kN bending tester would be suitable.

4. Shear Testing Machine Selection

Shear tests determine the shear strength of materials.

Key Formula:

F_max=τ × A

Where:

F_max = Maximum shear force (N)

τ= Shear strength of the material (MPa)

A = Shear area (mm²)

Example: For an aluminum sheet with τ=90 MPa and A=200mm²:

F_max=90×200=18,000N(18kN)

A 20 kN shear testing machine is recommended.

5. Peel Testing Machine Selection

Peel tests measure the adhesion strength between bonded materials.

Key Formula:

Where:

P= Peel strength (N/mm)

F= Measured force (N)

W= Width of the specimen (mm)

Example: For a tape with F=50N and W=25mm:

A peel testing machine with at least 5 N force capacity is required.

6. Tear Testing Machine Selection

Tear tests determine the resistance of a material to tearing forces.

Key Formula:

Where:

F_tear= Tear strength (N/mm)

F= Measured force (N)

t= Thickness of the specimen (mm)

Example: For a rubber sheet with F=100N and t=2mm:

A tear testing machine with 100 N capacity is needed.

When selecting a testing machine, ensure that the maximum force capacity of the machine is at least 1.2 to 1.5 times the calculated force to account for safety margins and unexpected variations. Additionally, consider compliance with relevant test standards (ASTM, ISO, GB, EN, JIS) and machine features such as speed control, data acquisition, and test automation.

By using the above formulas and examples, engineers and manufacturers can accurately determine the appropriate testing machine specifications for their specific material and application requirements.