The 25-ton double-layer flat vulcanizing machine is suitable for vulcanizing various rubber and plastic molded products and non-model products. It can also be used for pressing test specimens in laboratories and research institutes.
25 tons double layer flat vulcanizing machine
1. Product introduction
The 25-ton double-layer flat vulcanizing machine is suitable for vulcanizing various rubber and plastic molded products and non-model products. It can also be used for pressing test specimens in laboratories and research institutes.
The 25-ton double-layer flat vulcanizing machine is a column structure, and the pressing form is a down-pressure type.
The 25-ton double-layer flat vulcanizing machine is equipped with YCB-25/4 type double pump, which is directly driven by the motor. The motor is started by magnetic starter, and the built-in thermal appliance is used for overload protection. When the motor is overloaded or encounters a fault, it will automatically stop. .
The middle hot plate of the 25-ton double-layer flat vulcanizing machine is accurately installed in the middle of the four columns and is equipped with guides. The flat vulcanizing machine is heated by a tubular electric heating element, does not need a boiler, reduces air pollution, keeps the workshop clean, is convenient to operate, safe and reliable, and can be used by a single machine, which is convenient for the user. The flat vulcanizing machine is provided with a storage tank in the lower left corner, which is filled with oil, and the oil pump is used for circulation work. The flat vulcanizing machine is recommended to use N32# or N46# hydraulic oil. The oil must be filtered through a 100 mesh/25x25 filter before it can be injected into the fuel tank. The oil must be kept clean and free of impurities.
2. Main technical parameters
Nominal clamping force | 0.25MN |
Working fluid maximum pressure | 14.0Mpa |
Plunger maximum stroke | 250mm |
Hot plate area | 350x350mm |
Plunger diameter | Ø152mm |
Working layer | Two layer |
Hot plate spacing | 125mm |
Oip pump power | 2.2KW |
Single layer hot plate heating power | 2.4KW |
Total heating power | 9.4KW |
Heating method | Electric heating |
Max. temperature of heating plate | 200℃ |
Weight | 600kg |